KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware)
Do NOT install or remove hard drive while DVR is running!
Make sure that you already turn off the power and disconnect the power cord,
Before performing any services or maintenances.
Do NOT use electric screw-driver for installing or removing Hard Disc, when you
installing or removing Hard disc, or you will damage the Hard disc, Use screw driver
manual only.
Make sure to install one SATA hard disc
Installation and Connections
Hard Disc
Caution
Warning
Warning
(Max. storage size 2TB)
All rights reserved
! ! ! !
! ! ! !
! ! ! !
Step 1.
Loosen 4 screws on the two sides of the case
(Using cross screw driver),(As shown).
Step 2.
Remove the top cover by lifting and slide
back.(by hand)
14
inside the DVR
www.kguardsecurity.com