Error Display - Kenmore RFP74KB Series Service Manual

8. Operation and Functions

8-11. Error Display

Temperature Control Buttons
1. How to start
1) Press "Ice maker" button 5 times while touch "Freezer" button at the same time.
2) The front F-LED(or C-LED) displays as the right diagram shows
( [Ex.] Time Display of 0003 signifies 3 minutes of power on time.)
3) Press "Freezer Set" button and the following value is displayed successively.
① Operating Time
② F-Sensor temperature
③ R-Sensor temperature
④ FD-Sensor temperature
⑤ RD-Sensor temperature
⑥ IM-Sensor temperature
⑦ RT-Sensor temperature
⑧ Water amount control
4) Error is displayed only if there is any ; it is skipped if no error.
2. How to stop
1) Touch "Alarm" button 1 time.
2) It stops automatically in 4 minutes from the start.
3. All the error codes are reset if they turn to be normal.
4. Error code
ERROR CODE
F1
r1
i5
Fd
rd
rt
dr
dF
C1
F3
r3
d2
CO
Er CE
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
INPUT
CONTENTS
CONTENTS
F-sensor : disconnection ("Lo"), short ("Hi")
R-sensor : disconnection ("Lo"), short ("Hi")
IM-sensor : disconnection ("Lo"), short ("Hi")
FD-sensor : disconnection ("Lo"), short ("Hi")
RD-sensor : disconnection ("Lo"), short ("Hi")
RT-sensor : disconnection ("Lo"), short ("Hi")
R-Door Switch : defective
F-Door Switch : defective
Cycle : abnormal or defective
Return after defrosting : abnormal or defective(FD-S)
Return after defrosting : abnormal or defective(RD-S)
Display forced defrost mode for A/S
Pulldown
Communication error between MPCB - FCP
CONTROL OBJECT
88 Display CLED
7
REMARKS
24 / 59