10. Disassemble/Assemble Procedures
10-2. F Louver AS
* Remove the screw cap (2ea) on
the F-Louver A with a flat tip driver.
* Disassemble housing
10-3. F Fan AS
* Remove the screw (8ea) of Fixture
F Motor A.
* Separate Cover Fan Motor.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
* Remove Screws (2ea) of F-Louver A.
* Separate F Louver AS.
* Separate Fixture F Motor A
* Strongly pull out Fan Blade and
remove. And separate Motor.
27
* Pull forward top of F Louver.
* Remove the screw (1ea) of Cover
Fan Motor.
42 / 59