R Door As; Cover Multi Duct As - Kenmore RFP74KB Series Service Manual

10. Disassemble/Assemble Procedures

10-6. R Door As

* Remove Screws (1ea) of clip and remove the clip.
* Remove Bolt(1ea) of Hinge *T and remove the Hinge *T.
10-7. Cover Multi-Duct As
* Remove Cap Screws *T by '-' driver.
* Pull forward top of Multi Duct AS .
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
* Pull up the door and remove the door.
* Remove Cap Screws *U by '-' driver.
* Disconnect housings .
32
* Disconnect housing
* Remove Screws(2ea).
44 / 59