Display Pcb Replacement; Funnel Replacement; Sub Pcb For Working Dispenser; Cap Duct Repalcement - Kenmore 795.74092.41 Series Service Manual

3-12 DISPLAY PCB REPLACEMENT

1) Remove the dispenser cover and replace PCB with
dispenser cover.
2) Follow the steps in the pictures.

3-13 FUNNEL REPLACEMENT

1) Remove 2 screws.
2) Remove the funnel.

3-14 SUB PCB FOR WORKING DISPENSER

1) Remove a screw.
2) Remove the Sub PCB.
3-15 CAP DUCT REPLACEMENT
1) Remove the dispenser cover.
2) Remove the 2 screws.
3) Remove the funnel.
4) Remove the 2 screws.
5) Replace in reverse order.

3-16 CAP DUCT MOTOR REPLACEMENT

1) Separate the Housing of Cap Duct Motor.
2) Remove 3 screws to disassemble the motor.
3) When assembling a new Motor, always make sure of the
Duct Door and Link to install the Motor.
Good
- 14 - - 14 -
Duct Door
Link
Cap Duct Motor
Bad