Disassemble/Assemble Procedures; F Door As - Kenmore RFP74KB Series Service Manual

10. Disassemble/Assemble Procedures

10-1. F Door As

(1) Remove foods.
(2) Remove F Draw Case & F Case in freezer compartment.
(3) Assembling F Door procedure
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Pull up F Draw Case
and remove
Pull up F Case
and remove
1. Align end of rail(both side) with Supporter F Draw Rail
2. Fully push & close F Door. And check locking rail with lock of supporter
※ Up to this time, Fixture Rail Gear(steel stick) & gear Rail M have not to be
assembled.
3. Fully open F door.
4. Assemble one Gear Rail M in Supporter F Rail Gear.
5. Push and assemble another one Gear Rail M on opposite side of rail.
※ Check both side Gap of Door & Cabinet.
Push lock(both side) and
pull forward F Door and
remove F Door AS
26
41 / 59