6.1.2 Fcc; Fda/Cdrh; Ised; Iso - Siemens SIMATIC NETRUGGEDCOM RS900W Installation Manual

Rugged ethernet switches
Table of Contents

Advertisement

Certification
6.1.2 FCC
6.1.2
FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
This device further complies with Part 15, sub-part C of the FCC rules and is approved
under the ID VG5RW80G.
Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.3

FDA/CDRH

This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
6.1.4

ISED

This device is declared by Siemens AG to meet the requirements of the following
ISED (Innovation Science and Economic Development Canada) standard:
This device further complies with IC RSS-210 and is approved under the ID 4997A-
VG5RW80G.
6.1.5

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
36
Temperature rating T6 at 40 °C and T4A at 85 °C
Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
CAN ICES-3 (A)/NMB-3 (A)
RUGGEDCOM RS900W
Installation Manual, 04/2021, C79000-G8976-1028-13

Advertisement

Table of Contents
loading

Table of Contents