Table of Contents
Advertisement
Installing the Device
2.5 Connecting the Antennas
2.
3.
2.5
Connecting the Antennas
The RUGGEDCOM RS900W supports two dipole antennas that can be rotated 360°
around the connection point, and up to 90° at the joint for optimal positioning.
Note
The RUGGEDCOM RS900W is shipped with two 2.4 GHz dipole antennas.
Note
For technical specifications, refer to
To connect the antennas, do the following:
1.
12
Place the device against the panel and align the adapters with the mounting
holes.
1
1
Screw (M3.5 or #6-32)
1
Panel Mount Adapter
2
Figure 2.3
Panel Mounting
Secure the adapters to the panel with M3.5 or #6-32 screws.
Make sure the operating frequency range of each antenna is compatible with
the device.
2
2
"Wireless Ethernet Ports (Page
Installation Manual, 04/2021, C79000-G8976-1028-13
26)".
RUGGEDCOM RS900W
Advertisement
Table of Contents
