CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
PNP OS Installed
Init Display First
Reset Configuration Data
Resources controlled by
IRQ Resources
Memory Resources
PCI/VGA Palette Snoop
↑↓ →←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
Reset Configuration Data
If you enable this item and restart the system, any Plug and Play configuration data stored in
the BIOS Setup is cleared from memory.
Init Display First
Use this item to specify whether your graphics adapter is installed in one of the PCI E slots or
is integrated on the motherboard. If a PCI E graphics card is installed, the onboard VGA will
be disabled.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
3-10 Load Fail-Safe Defaults
Load Fail-Safe Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message similar
to:
Load Fail-Safe Defaults (Y/N)? N
PnP/PCI Configurations
No
PCI slot
Disabled
Auto ESCD
Press Enter
Press Enabled
Disabled
F6:Optimized Defaults
35
Item Help
Menu Level >
F7:Standard Defaults