Symantec NetBackup 5200 Series Troubleshooting Manual page 12

12 Introduction
NetBackup Appliance log file location information
To display the available log directories on your appliance, type
prompt.
To see the available log files in any of the log directories, use the
to change directories to the log directory of your choice. The prompt changes
to show the directory that you are in. For example, if you changed directories
to the directory, the prompt appears as
GUI
you can use the
ls
directory.
To view the files, use the
marked with
<FILE>
You can also use the
Main_Menu
Upload the log files to Symantec Technical Support.
Set log levels.
Export or remove CIFS and NFS shares.
Refer to the Symantec NetBackup 5200 Series Command Reference Guide for more
information on how to use the
NetBackup 5200-log file locations
Table 1-2
NetBackup appliance logs
NetBackup 52xx appliance configuration log
NetBackup 52xx appliance command log
NetBackup 52xx appliance debug log
NetBackup logs, Volume Manager logs, and
the NetBackup logs that are contained in the
openv directory
command to display the available log files in the
or
less <FILE>
and directories with
> >
Support
commands.
Logs
Log file location
<DIR> APPLIANCE
config_nb_factory.log
<DIR> APPLIANCE
app_change_control.log
<DIR> APPLIANCE
app_debug.log
<DIR> NBU
<DIR> netbackup
<DIR> openv
<DIR> volmgr
ls
. From that prompt
LOGROOT/GUI/>
command. Files are
tail <FILE>
.
<DIR>
commands to do the following:
Logs
at
LOGROOT/>
command
cd
log
GUI