Supply voltage
Note: The connection cables should be shortened in that
Figure 39: Example of a proper cable connection
-- Place the earthing insert, strain relief and washer in the
cable entry; fit and tighten the counter nut.
-- Strip the cable conductors to a length of about 1.5 cm, lightly twist them and fit cable end
sleeves.
Tighten the terminal screws – check the connection is secure by pulling gently.
Edition: May 20, 2005
Installation and Service manual
Compass STD 22
Coursebus
CAN bus
way, that they could be led to the terminal boards
without mechanical stress.
Too long connection cables will lead to EMC problems.
For the cable--type see respective drawing at the appendix.
Function "Quick Settling"
77
Compass
STD 22
3646/110--233.DOC010302