Table of Contents
Advertisement
-- Push the components of the screw fastening over the cable.
It is essential to follow the sequence (as shown in Figure 38).
-- Check the cone and the mating piece of the earthing insert for corrosion and
if necessary remove corrosion with an emery cloth.
-- Push the mating piece of the earthing insert to the end of the cable sheath.
-- Push the cone inside the screening and against the mating piece. Ensure
that the screening is evenly distributed over the cone (see Figure 38).
Figure 38: Creating the cable connection
3646/110--233.DOC010302
Installation and Service manual
Compass STD 22
Screening
Wall and DIN cap
Earthing insert
-- Cone
-- Counter part
Washer
Counter nut
76
Sealing
+ strain relief
Edition: May 20, 2005
Advertisement
Table of Contents
