2
Figure 10: Principle of separating the upper and lower halves of the outer sphere
-- Replace the upper half of the outer sphere on the lower half.
-- Retighten the six screws (see Figure 9/1).
-- Insert plug B3 (Figure 9/4) again.
3646/110--233.DOC010302
Installation and Service manual
Compass STD 22 Compact
Remove he upper half
of the outer sphere
– inserting the gyrosphere
Check that there is a proper seal between the two halves of
the outer sphere (see Figure 10/1)!
3
Insert the gyrosphere into
the lower outer sphere
26
1
Edition: May 20, 2005