PROAIM P-18-JS Assembly Manual page 4


Insert weight rod of section 5 then with a 1"
hole, according to your camera setup
requirements. Secure them with Weight
Closers.

Secure your camera setup with weight
closers as shown.
NOTE: Once you discover correct balance,
consider marking the weights for that particu-
lar camera; facilitating an easier set up the next
time.

Lock the pin for keeping your camera in a
fixed angle to take stable shots.

Attach LCD mounting arm onto central fork
then tighten the knob.
NOTE: The Central Fork has provision to attach
LCD Monitor (Not Included)
Arm.
via LCD Mounting
4