PROAIM P-18-JS Assembly Manual page 2

Jib Stand Setup

Slide Central Post of Jib onto the Jib Stand
and tighten knob-2 to secure it.

Open shank from central post. Leave the
black washers at one side help of wrench.
Jib Section Setup

Insert the section 4 inside central post then
Align holes of section with central post to
screw in the shank back.

Then tighten the bolt properly with the help
of a wrench, and to attach section 5 to 4,
loosen the bolt from section 4.

Section-5 has connecting bars attached with
section-4 on both ends and then tighten
them together using provided allen key.
2
Knob 2