Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 57

Blackmagic Converters Setup Settings
The Converters Setup utility can be used to change settings and update your Mini Converter's
software. You can access these settings by moving between the 'video,' 'audio,' and
'about' tabs.
The 'about' tab is detailed in the 'changing settings' section in this manual.
The 'video' tab for Mini Converter SDI to Analog 4K contains the following settings.
Output Levels menu
This lets you set the luminance and chroma levels, and the B-Y and R-Y component levels
independently.
Processing menu
This menu allows you to set the aspect ratio of down converted video. The options are
letterbox, anamorphic, center cut or no processing.
The 'clip video output to legal levels' checkbox controls clipping of your SDI input to ensure that
it stays within HDMI legal levels and should be kept on by default.
Use the 'video' tab in Converters Setup to adjust
analog video levels and processing settings.
The 'audio' tab for Mini Converter SDI to Analog 4K contains the following settings.
Blackmagic Mini Converters 57