Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 52

Mini Switch Settings Example
Experiment with the switches by setting your Blackmagic Mini Converter to output high
definition component video and analog audio channels 1 and 2 by setting switches 8, 5, 4, 3
and 2 to the OFF position.
SDI Audio Selection Table
Audio Channels
1 and 2
3 and 4
5 and 6
7 and 8
9 and 10
11 and 12
13 and 14
15 and 16
Blackmagic Converters Setup Settings
The Converters Setup utility can be used to change settings and update your Mini Converter's
software. You can access these settings by moving between the 'video,' 'audio,' and 'about' tabs.
The 'about' tab is detailed in the 'changing settings' section in this manual.
The 'video' tab for Mini Converter SDI to Analog contains the following settings.
Use the 'video' tab in Converters Setup to adjust
analog video levels and processing settings.
Switch 4 Switch 3
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
Switch 2 Switch Diagram
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Blackmagic Mini Converters 52