Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 30

SDI Audio Selection Table
Audio Channels
1 and 2
3 and 4
5 and 6
7 and 8
9 and 10
11 and 12
13 and 14
15 and 16
Blackmagic Converters Setup Settings
The Converters Setup utility can be used to change settings and update your Mini
Converter's software. You can access these settings by moving between the 'video',
'audio', and 'about' tabs.
The 'about' tab is detailed in the 'changing settings' section in this manual.
The 'video' tab for Mini Converter SDI to HDMI contains the following settings.
Processing menu
The 'clip video output to legal levels' checkbox controls clipping of your SDI input to ensure that
it stays within HDMI legal levels and should be kept on by default.
The 'clip video to legal levels' setting is checked by default.
This ensures that your HDMI video output stays within legal levels.
The 'audio' tab for Mini Converter SDI to HDMI contains the following settings.
Switch 4 Switch 3
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
Switch 2 Switch Diagram
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Blackmagic Mini Converters 30