Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 20

3 USB-C / POWER
Connect 5V power using a standard USB to USB-C cable. Also connects to Blackmagic
Converters Setup software via your Mac OS or Windows Computer. A small white LED
light next to the USB-C port will light up when connected to a power source.
4 SDI OUT
SDI video output BNC connector.
5 SDI IN
SDI video input BNC connector. The small 'lock' LED next to the SDI IN will illuminate
when a valid SDI input is detected.
Blackmagic Converters Setup Settings
The Blackmagic Converters Setup utility can be used to change settings and update your
Micro Converter's software.
The 'setup' tab contains the unit name and software version along with SDI Camera Control and
SDI Output options.
The Setup options for Micro Converter BiDirectional SDI/HDMI 3G.
SDI Camera Control
To ensure CCU and tally data from the ATEM switcher is sent to the correct camera the
'ATEM Camera ID' number should be set to match the ATEM's input number.
SDI Output
The '3G Output' setting lets you select between Level A or Level B 3G-SDI. This changes the
3G-SDI output standard to maintain compatibility with equipment that can receive only level A
or level B 3G-SDI video. The default setting is Level B.
Reset
You can also reset your converter to factory settings by clicking the 'factory reset' option.
Blackmagic Micro Converters 20