Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 37

Switch 6 - LUT 1, LUT2
Set Switch 6 to OFF to select LUT 1, or to ON to select LUT 2.
Switch 5 - LUT On Loop Off, LUT On Loop On
Set Switch 5 to OFF to select LUT On Loop Off, or to ON to select LUT On Loop On.
Switch 4 - SDI Audio De-Embed Bit 2
Switches 4, 3 and 2 are grouped together to provide 8 ON/OFF combinations. Having eight
different combinations allows eight independent pairs of audio channels to be de-embedded
from your SDI input and output to HDMI, analog or AES/EBU audio.
Switch 3 - SDI Audio De-Embed Bit 1
See switch 4 description.
Switch 2 - SDI Audio De-Embed Bit 0
See switch 4 description.
Switch 1 - HDMI Instant Lock Off, HDMI Instant Lock On
Set switch 1 to OFF to select HDMI Instant Lock Off, or to ON to select HDMI Instant Lock On.
When HDMI instant lock is enabled, the HDMI output signal is kept active even when changing
sources. This means your converter does not have to wait for the HDMI television or monitor to
lock before displaying the video output as the HDMI signal is already locked. It's important to
note that this feature only works when changing sources using the same video standard.
The HDMI instant lock feature can introduce a small delay in video and audio, so if you need
zero delay in your converted output you can bypass the HDMI instant lock feature by turning
HDMI Instant Lock OFF.
The switch legend on the base of your converter gives you all the
information you need to change conversion settings
Blackmagic Mini Converters 37