Blackmagicdesign Micro Converter SDI to HDMI 3G Installation And Operation Manual page 53

Processing menu
This menu allows you to set the aspect ratio of down converted video. The options are
letterbox, anamorphic, center cut or no processing.
The 'clip video output to legal levels' checkbox controls clipping of your SDI input to ensure
that it stays within HDMI legal levels and should be kept on by default.
Output Levels menu
This lets you set the luminance and chroma levels, and the B-Y and R-Y component levels
independently.
The 'audio' tab for Mini Converter SDI to Analog contains the following settings.
Output Levels menu
This menu allows you to adjust the gain on the audio output. You can adjust audio levels
independently per channel, or together by clicking the 'link' icon next to their sliders. To reset
all audio levels back to 0 dB click the 'reset' button at the top of the 'output levels' menu.
Use the 'audio' tab in Converters Setup to adjust analog audio levels.
Mini Converter SDI to Analog Block Diagram
Input automatically
detects between SD,
SDI In
HD and 1.5G-SDI
Redundant
Input Automatic
Change Over
Alt SDI In
Central
Processor and
Firmware
USB
Mini Switches
Equalizer, 10 bit HD to
Re-Clocker and SD Down
10 bit De-Serializer Converter
SDI Audio
De-Embedder
Automatic
SD/HD/1.5G-SDI
Cable Driver
Analog or AES/EBU
Audio Out Switch
AES/EBU
Audio Formatter
Audio Digital to
Analog with
Balanced Output
12 Bit Digital to
Analog SD/HD
Video Converter
Component output can switch
to S-Video and composite
Blackmagic Mini Converters
Loop SDI
Out
Left Analog Out
or AES/EBU Out
Right Analog Out
Y
R-Y
B-Y
53