4
Commissioning (installers only)
B Set the DIP switch on IPM 1 in accordance with the details in
the instructions supplied.
B Switch on the system.
During first commissioning or after a global reset (resetting all
adjustments):
B For systems with one heating circuit:
Acknowledge flashing code 1 HC by pressing
-or-
B If the controller is to regulate a heating circuit HC
permissible in Germany):
Select corresponding code 2 HC to 10 HC by turning
confirm by pressing
Only one FR 10 can be assigned per heating circuit
and per code.
System configuration starts automatically, and after approx. 60
seconds AC will be displayed.
6 720 645 356 (2010/09)
Commissioning (installers only) | 121
.
.
(not
2...10
and