5.1
Changing the operating mode
B Briefly press mode until the required operating mode is
displayed.
= constant High
= constant Low
= constant Frost
The set operating mode is only active if heating operation is not
blocked
5.2
Changing the required room temperature
Use this function if you want to change the required
room temperature by way of an exception, e.g. for
the duration of a party.
B With rotary selector
temperature for the current operating mode
During this period, the required room temperature will flash
instead of the display showing the current room temperature.
The change to the required room temperature will remain in
force until the next operating mode change or until the power
is interrupted. At that point the system reverts to the room
temperature programmed at the user level for that particular
operating mode.
6 720 645 356 (2010/09)
.
adjust the required room
Operation | 123
/
/
.