2
Technical data for the accessory
item
The FR 10 can only be connected to a heating
appliance with BUS-enabled Heatronic 3.
The FR 10 enables the room temperature control of a single
•
heating circuit.
According to paragraph 12 of the EnEV (Order governing the
•
energy-saving thermal insulation and energy-saving system
technology in buildings in Germany), the FR 10 must only be
used in conjunction with a suitable time switch.
In systems with a single heating circuit, you can change
•
automatically between the currently selected operating mode
/
/
program of a time switch.
The FR 10 can be used in systems with room temperature
•
controller FR 100/FR 110 to extend the system to up to 10
heating circuits (not permissible in Germany). For further
information, see the documentation of FR 100/FR 110.
The controller is prepared for wall mounting.
•
2.1
Standard delivery
Fig. 2 on page 159:
1
Top section, controller and wall mounting base
2
Installation and operating instructions
6 720 645 356 (2010/09)
Technical data for the accessory item | 115
or heating operation blocked
using the time