Reattach The Cover Of The Wired Wall Thermostat; Installation Guide For Wall Mounted Indoor Unit Only - Bosch BMS-WT1 Series User Manual

1 0 | Bosch Climate 5000 Series Wired Wall Thermostat
DO NOT allow water to enter the wired wall thermostat.
Use the trap and putty to seal the wires.
Putty
Trap
Figure 13

5.7 Reattach the Cover of the Wired Wall Thermostat

1. Avoid clamping during installation.
Figure 14
Data subject to change
Putty
Putty
Trap
Trap

5.8 Installation Guide for Wall Mounted Indoor Unit Only

1. Open the front panel of the Wall Mounted Indoor Unit
Figure 15
2. Disconnect the wire from the main control board.
Figure 16
3. Identify the components. From left to right,display board and adapter
board.
Figure 17
User Manual
06.2019 | Bosch Thermotechnology Corp.