Changing The Standard Setting Of The Required Room Temperature - Bosch FR 10 Installation And Operating Instructions Manual

|
124 Operation
5.3 Changing the standard setting of the required
room temperature
Use this function if you want to permanently change
the required room temperature away from the
standard setting.
B Accessing user level: Hold down mode for approx. 3 seconds
until – – is displayed.
B Release the mode key and turn
parameter is shown:
– 1A p = Required room temperature for
– 1b p = Required room temperature for
– 1C p = Required room temperature for
B Briefly press
selected parameter will be displayed.
B Briefly press
B Turn
High = maximum temperature required (e.g. if people are
–
spending time in the living areas and require a comfortable
temperature). Setting range is higher than
30 °C.
Low = average temperature required (e.g. if a lower room
–
temperature is sufficient or if everyone is out or asleep and
the building must not cool down too much). Setting range
is higher than
: The current temperature for the previously
: The current temperature flashes.
to adjust the required room temperature:
Frost and lower than
until the required
High
Low
Frost
Low up to
High.
6 720 645 356 (2010/09)