Transport And Storage; Inspection; Transporting The Device - ABB CoriolisMaster FCB400 Series Manual

28 CoriolisMaster FCB400, FCH400 CORIOLIS MASS FLOWMETER | CI/FCB400/FCH400-EN REV. H

4 Transport and storage

Observe the following instructions:
• Do not expose the device to humidity during transport.
Pack the device accordingly.
• Pack the device so that it is protected against vibrations
during transport, for example, by using air-cushioned
packing.

Inspection

Check the devices immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents.
All claims for damages must be submitted to the shipper
without delay and before installation.

Transporting the device

DANGER
Life-threatening danger due to suspended loads.
In the case of suspended loads, a danger of the load falling
exists.
• Standing under suspended loads is prohibited.
WARNING
Risk of injury due to device slipping.
The device's center of gravity may be higher than the harness
suspension points.
• Make sure that the device does not slip or turn during
transport.
• Support the device laterally during transport.
Figure 5: Transport instructions
Observe the following when transporting the device to the
measuring location:
• Observe the weight details of the device in the data
sheet.
• Use only approved hoisting slings for crane transport.
• Do not lift devices by the transmitter housing or terminal
box.
• The center of gravity of the device may be located above
the harness suspension points.