Safety Precautions - Levitronix BPS-200 User Manual

1 Safety Precautions

The BPS-200 pump system is designed to be used in industrial production machines and equipment
containing hydraulic circuits. Typical applications are Semiconductor and chemical manufacturing equipment.
Installation shall be done by qualified personnel only. Following safety precautions and all "CAUTION",
"WARNING" and "DANGER" indications in the relevant sections shall be followed.
Do not under any circumstances open the controller or motor. Levitronix
not assume responsibility for any damage, which occurs under such
circumstances.
High magnetic field strength of pump impeller.
The pump system contains a rotor magnet with high field strength. This may
alter or damage the calibration of sensitive electronic devices and measuring
instruments in the immediate surroundings. Keep at a safe distance from
computers, monitors and all magnetic data storage media (e.g. disks, credit
cards, audio and video tapes etc.)
Hazardous voltage may be present.
In case of the usage of an inadequate AC/DC power supply, mains voltages
may be present (even if the system is designed for 24-48VDC). The usage of a
galvanic separated power supply, which is certified by a 3
highly recommended.
The controller must be grounded and placed in a spill protected electrical
cabinet. Do not under any circumstances open the powered controller.
Always isolate the electrical power supply before making or changing
connections to the unit. To remove the power it is recommended to use an
isolating device.
High magnetic field strength of pump impeller.
The pump system contains a rotor magnet with high field strength.
Pacemakers may be influenced and magnetic forces may lead to contusions.
Keep distance to pace makers and handle impeller with care.
TOXIC CHEMICALS may be present.
When using the system to pump chemicals skin contact and toxic gases may
be hazardous to your health. Wear safety gloves and other appropriate safety
equipment.
Motors for ATEX/IECEx applications. Only specific types of motors BSM-1.x
are classified for the use in Ex classified locations. Refer to the corresponding
section in the manual.
PL-4012-00, Rev07, DCO# 20-144
CAUTION
CAUTION
WARNING
!
WARNING
!
WARNING
!
!
WARNING
User Manual for BPS-200
www.levitronix.com
®
does
rd
party (UL or CE), is
3