Levitronix BPS-200 User Manual page 10

Cable
Jacket
FEP
PVC
Table 6: Specifications for min. bending radius of motor and adaptor cables for BSM-1
Note: If not mentioned explicitly all the cables are not suited for constant dynamic bending and movement!
Figure 9: Basic dimensions (in mm) of controller LPC-200.2
PL-4012-00, Rev07, DCO# 20-144
Cable OD Minimum Bending Radius
Motor Sensor Permanent Installation
8.50 mm
9.50 mm
Alternative for
mounting DIN
rail clips
(Same basic dimensions for LPC-200.1)
Minimum Bending Radius
7x Cable OD
5x Cable OD
User Manual for BPS-200
www.levitronix.com
Sometimes Moved
15 x Cable OD
11 x Cable OD
10