Detailed Instruction Of Display; Main Keys On The Panel; Description Of Main Functions On The Panel - Texi ART AUTO User Manual

8. Detailed instruction of display

8.1 Main keys on the panel

Safety switch
Oil alarm system
Function keys
Confirmation key
Motor speed adjustment
Standard sewing mode
Start bar-tacking
End bar-tacking
Thread trimming
Presser foot up after cut
Presser foot up after sewing
Soft start
Programmable segments mode
One-shot sewing
Stitch pattern design

8.2 Description of main functions on the panel

The outer ring frame of the icon light up means this function open. If you need to close the function, you can press the icon to
make the outer ring frame disappear.
If panel is not used for more then one minute it will be automatically blocked. All new machines with „Factory set-
tings" will have this function activated.
Note: To switch off this function, please enter parameter P138, change the data from "1" to "0", then press button
"S" to confirm new settings.
Increasing the sewing speed
Thick material detection sensor
When function is on, sensor will detect type of sewed (thick) material and adjust all settings automatically. Note: If
sensor won't detect material correctly, enter parameter P107 and change the date. For thick fabric increase the
data, for thin fabric reduce the data.
Double-lock function will end each pattern with two additional stitches.
Bartack design button allows to design the front and back bartack stitch.
Reducing the sewing speed.
37
EN
Repair guidance
Thread counter
Plus or minus key
Left and right key
Segmented sewing mode
Controller of initial stitch
Needle positioning
Thick material detection sensor
Bartack design key
Thread tension - unactive
Double-lock stitch key
W-type lock stitch
Unlock key
TEXI ART AUTO operation manual