Texi 1501 TS PREMIUM Operation Manual
  1. Manuals
  2. Brands
  3. Texi Manuals
  4. Sewing Machine
  5. 1501 TS PREMIUM
  6. Operation manual

Texi 1501 TS PREMIUM Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TEXI 1501 TS PREMIUM
OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Texi 1501 TS PREMIUM

Summary of Contents for Texi 1501 TS PREMIUM

  • Page 1 TEXI 1501 TS PREMIUM OPERATION MANUAL...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PART 1 CONTROL SYSTEM 1.1 SYSTEM OVERVIEW 1.2 PRECAUTIONS 1.3 WORKING ENVIRONMENT 1.4 SYSTEM POWER SUPPLY AND GROUNDING 1.5 OPERATION PANEL AND KEY FUNCTION 1.5-1 Key Function Introduction 1.5-2 Icons Description of Touch Keys 1.5-3 Function PART 2 EMBROIDERY DESIGN INPUT OPERATION 2.1 INPUT USB DRIVE DESIGN TO MEMORY 2.2 DELETE DESIGNS IN EMBROIDERY DESIGN MANAGEMENT PART 3 SELECTING DESIGN IN EMBROIDERY DESIGN MANAGEMENT...
  • Page 3 4.4 EMBROIDERY OPERATION STATUS 4.5 EMBROIDERY START/STOP OPERATION 4.6 SWITCH CONTROL AND INDICATORS OF SEQUIN MACHINE HEAD PART 5 LETTERS TO GENERATE EMBROIDERY FILE PART 6 MANUAL OPERATION FOR COLOR CHANGING PART 7 MANUAL TRIMMING PART 8 HOOP ORIGIN OPERATION 8.1 MANUAL HOOP ORIGIN SETTING 8.2 AUTOMATIC SEARCHING FOR ABSOLUTE ORIGIN OF HOOP 8.3 SET SOFTWARE LIMITS...

  • Page 5: Part 1 Control System

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 1 Control System 1.1 System Overview Before using the machine, please read the operation manual carefully to ensure correct usage of the system. Please keep the operation manual readily available for easy reference.

  • Page 6: Working Environment

    Texi 1501 TS Computerized Embroidery Machine Operation Manual V2.1 1.3 Working Environment Good ventilation, healthy environment, less dust; Working space temperature: 5-40 °C; 41-104 °F Working Space Relative Humidity: 30% - 90% non-condensing. 1.4 System Power Supply and Grounding The electric control system can use the following power: Single phase AC100-220V/50-60HZ Depending on the machines configurations, power consumption is between 0.1-0.4KW.
  • Page 7 Texi 1501 TS Computerized Embroidery Machine Operation Manual Set start point and trace design, also changes the preparation status to operation status. Origin point key. Offset point key. Color changing mode key (automatic color changing, semi-automatic, and manual) Manual color changing key, left side displays current needle position and right side displays main axis degree.

  • Page 8: Function

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 1.5-3 Function The system has a friendly HMI operation mode that is easy to operate and learn. The system has powerful functions and is convenient for user operation. With multilingual support, it can switch the operation system language based on the user’s needs at any time.

  • Page 9: Part 2 Embroidery Design Input Operation

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 2 Embroidery Design Input Operation The embroidery design management interface is to input embroidery designs from the USB drive into memory. It can be operated in both the embroidery preparation status and operation status.

  • Page 10: Delete Designs In Embroidery Design Management

    Texi 1501 TS Computerized Embroidery Machine Operation Manual previous interface. Press key to return to main interface. 2.2 Delete Designs in Embroidery Design Management In embroidery design management operation interface, click the embroidery design to delete. Press key to delete design.

  • Page 11: Part 3 Selecting Design In Embroidery Design Management

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 3 Selecting Designs in Embroidery Design Management In the main interface, press key to enter into the embroidery designs management interface, as in the following Fig. 2. If an USB drive is connected, press key to enter into the memory of the machine.

  • Page 12: Delete Single Embroidery Design

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 3.2 Delete Single Embroidery Design In the embroidery design management interface, select the design to delete, and press key to delete design. 3.3 Output Embroidery Design to USB Drive In the embroidery design management interface, select the embroidery design to output.

  • Page 13: Part 4 Embroidery Design

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 4 Embroidery Design 4.1 Embroidery Status Mode The machine has 2 embroidery statuses, i.e. preparation status, operation status. Switching between statuses can be done via pressing key on main interface. As in the following Fig.

  • Page 14: Preparation Status

    Texi 1501 TS Computerized Embroidery Machine Operation Manual In operation status, press key and a pop up appears “Remove embroidery status”. Press key to enter into preparation status, as in figure 3. 4.2 Preparation Status In preparation status, it can do main axis origin return, trimming, hoop switching, manual color changing, embroidery design parameter setting and embroidery design selection and other operations.

  • Page 15: Switching Hoops

    Texi 1501 TS Computerized Embroidery Machine Operation Manual X/Y direction space: 0-±999.9mm The control system takes mm as unit. Its numeric input value is 0.1mm (0.1 mm = 1 mm) when inputting digits, i.e. if 100 mm space is needed, the input value would be 1000 mm.

  • Page 16: Operation Status

    Texi 1501 TS Computerized Embroidery Machine Operation Manual automatically. In all other hoops, the design doesn’t rotate 180°. 4.3 Operation Status In the operation status, you can set the embroidery design origin (starting point) setting, embroidery design origin return, offset point return, stop point return, color changing sequences...

  • Page 17: Offset Operation

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 4.3-4 Offset Operation In the embroidery process, if is required to return to the offset point. Press once and the hoop is moved to the offset point and will stop. Press the key gain, the hoop is moved from the offset point to the starting point and stops, and then it can continue embroidering.

  • Page 18: 6-1 Set Color Changing Sequence

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 4.3-6-1 Set Color Changing Sequence In the color changing sequence to set the interface, press the number key to enter the color changing sequence. Change the colors from 1-30 from the 1 page (the system supports a max of 200 colors change sequences).

  • Page 19: 6-3 Sequin Design

    Texi 1501 TS Computerized Embroidery Machine Operation Manual parameters, press key once before the letter “L” is displayed on the right hand side of current needle bar number. Press key to cancel low embroidering speed setting. If all color change sequence of a certain set needle bar shall be replaced by another needle...

  • Page 20: Embroidering Float Mode Switching

    Texi 1501 TS Computerized Embroidery Machine Operation Manual In the manual color changing and manual starting mode, set color changing sequences are not available. 4.3-8 Embroidering Float Mode Switching Embroidering mode switching is mainly to skip certain section on your design. The user can move the embroidery needle to specified location via float embroidering.

  • Page 21: Embroidery Design Trace Operation

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Backward position: After pressing key, a keyboard pops out. Press number key to input required backward position in stitch count. Press key and the hoop is moved to specified stitches and stopped automatically.

  • Page 22: Embroidery Operation Status

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 4.4 Embroidery Operation Status In embroidering operation status, only the main axis speed operation is used. Press key to slow or accelerate the main axis speed. 4.5 Embroidery Start/Stop Operation After setting embroidering related parameters, the embroidery machine can start embroidering by pressing start key.
  • Page 23 Texi 1501 TS Computerized Embroidery Machine Operation Manual When the switch is in middle position, the upper indicator is in green before entering into sequin embroidery. The landing chassis is in the upper position and waiting for automatic control. When entering sequin embroidering mode, the landing chassis lands automatically and the lower indicator is in green.

  • Page 24: Part 5 Letters To Generate Embroidery File

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 5 On Board Lettering In the machine operation interface, press key to enter into letter interface, as in the following Fig 8: Figure 8 On Board Lettering Press any letter key to select required letters or other signs. Press key to switch upper-case and lower-case letters.
  • Page 25 Texi 1501 TS Computerized Embroidery Machine Operation Manual Set the letter related parameters. After setting is completed press key below to select required letter type (5 types). Press key to generate letter pattern. On the left upper corner, you can see the generated embroidery file.

  • Page 26: Part 6 Manual Operation For Color Changing

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 6 Manual Operation for Color Changing In operation or preparation interface, press key to take manual color changing operation. The interface will change with the numbers of needle on the machine. Press...

  • Page 27: Part 7 Manual Trimming

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 7 Manual Trimming Either in embroidery preparation or operation status, trimming operation can be done. Press key on panel to make a manual trimming operation.

  • Page 28: Part 8 Hoop Origin Operation

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 8 Hoop Origin Operation The hoop origin operation includes manual origin setting and absolute origin searching and software limits setting. In machine operation interface, press key to enter into origin operation interface, as in the following Fig 10.

  • Page 29: Set Software Limits

    Texi 1501 TS Computerized Embroidery Machine Operation Manual In the hoop origin interface, press key to select operation. The interface will pop up a dialogue “Please confirm the limit switch is in normal operation.” Press key to start absolute origin searching. After searching is completed, the hoop will return to the stop point before searching automatically.

  • Page 30: Part 9 Hoop Setting

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 9 Hoop Setting The function is only used to set cap frame and A-F hoop size and dimension from absolute origin of hoop to hoop center. In embroidery parameter interface, press “hoop setting” key, as in the following Fig.

  • Page 31: Part 10 Production Statistics

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 10 Production Statistics The function is only used to generate statistics and clearing statistics operation. Check the process information on main interface. The first is production quantity of current embroidery file and the latter one is total stitches of the current embroidery file.

  • Page 32: Part 11 Main Axis Origin Operation

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 11 Main Axis Origin Operation This function is only used for main axis position stops. It can be operated as one of the two panel button. According to requirements it can be operated as by following.

  • Page 33: Part 12 Language Switching

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 12 Language Switching In the main menu interface, press key to enter machine parameter settings. To make language switching operation, press key, menu will change to show all the different language the machine has, click and select required language. The system is switched to...

  • Page 34: Part 13 Embroidery Parameters Settings

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 13 Embroidery Parameters Settings According to different machine configuration and embroidery processing requirements, it is possible to modify some commonly used parameters to meet the operation requirements. In the main menu interface, press key to enter into embroidery parameter interface.

  • Page 35: Part 14 Machine Parameters Setting

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 14 Machine Parameters Setting The machine parameters should be used by professional technicians only. Don’t make modification without permission from a certified technician in order to avoid causing damage to the machine and abnormal operation.

  • Page 36: Part 15 User Management

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 15 User Management The user management should only be used by professional technicians. Don’t make modification without permission by a certified technician in order to avoid causing damage to the machine and abnormal operation.

  • Page 37: Part 16 Restriction Releasing

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 16 Restriction Releasing 16.1 Lock Removal If any restriction of use is expired, the system is locked automatically and prompts to release restriction by inputting passwords, as in the following Fig.

  • Page 38: Part 17 System Test

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 17 System Test This operation is mainly for maintenance technicians, and is used to test whether the operation of machine is normal. In machine parameter settings interface, press key to enter into test interface menu.

  • Page 39: Main Axis Test

    Texi 1501 TS Computerized Embroidery Machine Operation Manual 17.3 Main Axis Test In the test interface menu, press key to enter into the main axis test. Press key corresponding to every test item, check whether the output is valid. If corresponding equipment output has no action, the current output may have a fault.

  • Page 40: Part 18 System Information

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 18 System Information In the main menu interface, press key to enter into system information interface menu. 18.1 System Number and Version Information Checking It is used to check the system number and version information of the control system.

  • Page 41: Part 19 Ip Setting

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 19 IP Setting In the machine parameter setting menu interface, press key to enter into IP setting interface. The IP set for the machine must set with the same number segment as the LAN IP, otherwise, it cannot be linked, i.e.

  • Page 42: Part 20 System Initialization

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 20 System Initialization After the machine is powered up and displays “1.INIT USB OK”, press times, the system will re-initialize. After the system initialization is completed, a buzzer will sound “tick, tick, and tick” three times continuously, the system will enter into the embroidery preparation interface.

  • Page 43: Part 21 Appendix

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Part 21 Appendix 21. 1 Parameter Table Parameter Name Parameter Function Default Range Embroidery Parameters 1 Start trimming or not trimming when there are several 1-9, No Jump to Trim: skip stitches.
  • Page 44 Texi 1501 TS Computerized Embroidery Machine Operation Manual Tread Broken Thread break detection sensitivity stitches, Sensitivity: stitches T.B Detect at Take break detection or not in skipping stitch embroidery. Yes, No Jump: Automatic backing stitches after breakage. Breakage Auto Back When machine head shall compensate embroidery in advance T.B.:...
  • Page 45 Texi 1501 TS Computerized Embroidery Machine Operation Manual Moving start angle of hoop motor. The larger load the hoop is, the smaller the moving angle is. It take Frame Move 250* 220-270° appropriate adjustment according to actual embroidery Angle: effect Positive compensation for thin material.

  • Page 46: System Errors And Countermeasures List

    Texi 1501 TS Computerized Embroidery Machine Operation Manual Stop Frame of Allow drawing bar stop or not when beyond the hoop Yes, No Moving: Return offset Deliver to highest position of hoop automatically or not Yes, No automatically after embroidery is completed.
  • Page 47 Texi 1501 TS Computerized Embroidery Machine Operation Manual 2. Drive damage 2.Replace driver Trimming is not in 1.Approaching switch detection is not in 1.Manual adjustment for trimming connecting position place l rod to in place 2. Approaching switch damage 2. Replace approaching switch...
  • Page 48 Texi 1501 TS Computerized Embroidery Machine Operation Manual...

Table of Contents