Stitch Length Setting; Free Arm - Texi Tegra 4 User Manual

EN

STITCH LENGTH SETTING

FREE ARM

90
Texi Tegra 4 INSTRUKCJA 2019.indb 90 Texi Tegra 4 INSTRUKCJA 2019.indb 90
Note: Trimming width between
3.0-4.5 mm, only suitable for right
needle, the left needle to increase
2.2 mm, that is between 5.2-6.7 mm.
By rotating the stitch adjustment knob, the
stitch length can be set between F (1mm)-
4mm. For ordinary sewing, the stitch length
is set at 3mm, when sewing thicker fabrics,
should be set at 4mm.
Remove the cloth waste box, pull the front cloth base out
to the left and reinstall the cloth waste box.
Note: before removing and nstalling the front cloth
base, remove the cloth waste box, making it easier to
install and disassemble the front cloth base.
Free arm is suitable for sewing such as tubular
shaped parts such as sleeves and trouser legs etc.
To install again front cloth base, push it to the right
until it will be safely locked.
Texi Tegra 4
18.09.2020 09:42 18.09.2020 09:42