U-Line H-5443 Manual page 2

The handle, retaining lip and foot lever of H-5443 lift
table are dismantled when shipped. They must be
attached to the lift table before operating.
HANDLE INSTALLATION
Fix the handle to the table body with flat washer, lock
washer, and bolt. Tighten the bolt with a 3/8" Allen
wrench. (See Figure 1)
FOOT LEVER INSTALLATION
Insert the foot pedal into the hole of the square bar. Fix
the foot pedal with bolt, flat washer, lock washer and
nut. Tighten the nut with a 7/16" wrench. (See Figure 2)
RETAINING LIP INSTALLATION
Fix the retaining lip to the table body with flat washers,
lock washers and bolts. Tighten the bolt with a 5/8"
wrench. (See Figure 3)
IMPORTANT! After assembling table, lift and
release the control lever five times before
operation. (See Figure 4)
PAGE 2 OF 12
ASSEMBLY
Figure 1
Figure 2
Figure 3
Retaining
Table
Body
Figure 4
Control
Lever
Handle
Flat Washer
Lock Washer
Bolt
Nut
Lock Washer
Flat Washer
Bolt
Lip
Foot
Pedal
Bolt
Lock
Washer
Flat
Washer
0821 IH-5443