Page 1
π H-1799, H-5527 1-800-295-5510 uline.com SHOP DESK TOOLS NEEDED Phillips Screwdriver 10 mm Wrench 7 mm Wrench PARTS Small Bolt x 4 Small Nut x 4 Small Washer x 4 Small Lock Washer x 4 Large Bolt x 44 Large Nut x 44...
Page 2
ASSEMBLY LEG ASSEMBLY Place desk top on a smooth, non-marring surface with top side facing down. 2. Attach legs using 4 large bolts and 4 large nuts on each leg. (See Figure 1) NOTE: Make sure all 4 leg holes are lined up with desk top holes before assembling.
Page 3
ASSEMBLY CONTINUED DRAWER ASSEMBLY Remove drawer slides from the outsides of the drawer. Press the drawer slide release lever to remove slides completely. (See Figure 4) NOTE: Depending on the side, press release lever either down or up to remove slides. RELEASE LEVER Figure 4 2.
Page 4
ASSEMBLY CONTINUED TOP SHELF ASSEMBLY Set desk top assembly upright and recheck all bolts and nuts for tightness. 2. Place top shelf on desk top and assemble with 6 large bolts and 6 large nuts. (See Figure 7) 3. Insert plastic cable ring and cover into the top shelf from the front of the desk.