6.5. File name of measurement series
In order to define the alphanumeric file name of the measurement series, proceed as follows:
• Press the
key.
• Use the navigation keys to input the filename.
• Confirm selection with the
tested production lot / part. The file name identifies the test series after downloading the
data to a PC using Equolink 3 or the Equotip 3 Automation Package, respectively.
Ensure that the disc symbol for automatic storage is displayed if the
Note:
i
data needs to be saved. If this function is switched off, the measured data
is lost once the series has been closed.
Keyboard-style or SMS-style input modes can be used. The con-
Note:
i
figuration can be changed through "Config" – "User interface". A USB key-
board, a USB mouse or a USB scanner may be connected to the connec-
tion ports (use the USB type A socket).
When a measurement series has been closed and the series is
Note:
stored, the last alphanumeric character of the file name is automatically
i
incremented. A different file name can be defined manually by pressing the
key.
© 2012 by Proceq SA
key. The file name can be used as the reference to the
20