Material Groups - Proceq Equotip 3 Operating Instructions Manual

6.2. Material groups

To change material group proceed as follows:
• Press the F2 key to select the material group.
• Use the navigation keys to choose a material group.
• Confirm selection with the
have been converted using the conversion function for the newly selected material group.
Note: To measure in the native Leeb rebound scale HL, no material group must
be selected, as no conversion is applied. In contrast, hardness scale conver-
sions to other scales are correct only when the appropriate material group is
i
selected. Free online material databases and the Equotip 3 on-screen help can
be useful to assign your materials to one of the nine material groups. Suitability
of conversions for specific materials should be qualified on calibrated samples
before use. For further advice, please consult Proceq.
Note: For a given hardness scale, the dropdown only lists the material groups
i
for which conversions are available.
© 2012 by Proceq SA
key. If readings were shown on the display, they will now
16