Renishaw OMP40-2 Installation Manual page 46

OMP40-2 installation guide
Item
OMP40M module
LPE1
LPE2
9.2
LPE3
MA4
LP2
Publications. These can be downloaded from our website at www.renishaw.com.
OMP40-2
OMI-2
OMI-2T
OMM-2
OSI
OMI
OMM
MI 12
Styli
Software features
Software list
Taper shanks
Part number Description
A-5626-2001 OMP40M module with batteries, tool kit and quick-start guide
(set to optical on / optical off) – modulated transmission,
PROBE 1 start.
A-2063-7001 LPE1 extension bar – 50 mm long.
A-2063-7002 LPE2 extension bar – 100 mm long.
A-2063-7003 LPE3 extension bar – 150 mm long.
A-2063-7600 MA4 90° adaptor assembly.
A-2063-6098 LP2 probe complete with two C spanners and TK1 tool kit.
A-4071-8500 Quick-start guide: for rapid set-up of the OMP40-2 probe
(includes CD with installation guides).
A-5191-8500 Quick-start guide: for the rapid set-up of the OMI-2 (includes
CD with installation guides).
A-5439-8500 Quick-start guide: for the rapid set-up of the OMI-2T (includes
CD with installation guides).
A-5492-8550 Quick-start guide: for the rapid set-up of the OMM-2 (includes
CD with installation guides).
A-5492-8500 Quick-start guide: for the rapid set-up of the OSI interface
(includes CD with installation guides).
H-2000-5062 Installation and user's guide: OMI – Optical machine interface.
H-2000-5044 Installation and user's guide: OMM – Optical machine module.
H-2000-5073 Installation and user's guide: MI 12 machine interface.
H-1000-3200 Technical specifications guide: Styli and accessories.
H-2000-2289 Data sheet: Probe software for machine tools – illustrated
features.
H-2000-2298 Data sheet: Probe software for machine tools – list of
programs.
H-2000-2011 Data sheet: Taper shanks for machine tool probes.