Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Steps
1. Go to Configuration → Image → Display Settings .
2. Select the thermal channel.
3. Click Image Enhancement, select Palette as White Hot or Black Hot.
4. Set the temperature value and color of High Temperature, Interval Temperature, or Low
Temperature targets.
Above (be colored)
When the target of high temperature needs to be colored, you can set the high temperature
color. Target above the setting temperature will be displayed in setting color.
Between (be colored)
When the target of an interval temperature needs to be colored, you can set the interval
temperature color. Target between the minimum and the maximum temperatures will be
displayed in setting color.
Below (be colored)
When the target of low temperature needs to be colored, you can set the low temperature
color. Target below the setting temperature will be displayed in setting color.
5. Click Save.
10.4.18 Set Palette Range
The live view can display the palettes effect of the specified temperature range.
Select Manual or Auto from By Temp. Range drop down list.
Auto
The device detects the max. temperature and min. temperature of the scene automatically and
display image of the whole scene with palettes.
Manual
In this mode, you can enter the temperature upper limit and lower limit manually. And the live
view shows the palettes effect of the desired temperature section more detailed.
10.4.19 Brightness Sudden Change
When the brightness of target and the background is hugely different (the temperature difference
of target and background is huge), the system reduces the difference for viewing.
10.4.20 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
65
Advertisement
Table of Contents
