Removal Of The Charge Neutralizing Relay; Removal Of The Waste Toner Full Detecting Sensor; Removal Of The Waste Toner Bottle Set Sensor - Minolta CF1501 Service Manual

(47) Removal of the Charge Neutralizing Relay

(48) Removal of the Waste Toner Full Detecting Sensor

(49) Removal of the Waste Toner Bottle Set Sensor

1. Remove the MSC/PIC Board Box.
D-41 (steps 1 through 8)
2. Remove four terminals.
3. Remove one screw and the Charge Neutralizing
Relay.
4004D160AB
1. Remove the LED Unit.
D-22
2. Remove one screw and the Waste Toner Full
Detecting Sensor Cover.
4004D161AA
3. Unplug one connector and remove the Waste
Toner Full Detecting Sensor.
4004D162AB
1. Remove the LED Unit.
D-22
2. Disengage two locking tabs and remove the
Waste Toner Bottle Set Sensor Assy.
4004D163AA
D-62