Removal Of The Drawer Set Sensor And Drawer Paper Near-Empty Sensor - Minolta CF1501 Service Manual

(31) Removal of the Drawer Set Sensor and Drawer Paper Near-Empty Sensor

1. Slide out the drawer.
2. Remove the Rear Upper Cover, Rear Right Cover, Rear Left Cover, and Rear Cover.
3. Remove the MSC/PIC Board Box.
D-41 (steps 1 through 8)
4. Remove four terminals.
✽ Terminal colors: White, blue, red, and orange from
top down
5. Remove two screws and the terminal harness
guide.
4004D138AB
6. Remove two screws and High Voltage Unit 1.
7. Unplug two connectors.
8. Remove the harness from one cord clamp and
one edge cover.
4004D140AB
9. Unplug three connectors.
10. Remove the harness from one edge cover.
11. Remove two screws and High Voltage Unit 1.
4004D139AA
12. Remove one screw and the sensor assy.
13. Remove the harness from one edge cover and
unplug two connectors.
4004D141AB
D-56