Table of Contents
Advertisement
User Mode Settings
6
User Mode Settings
6.1
Storing a Copy Job Program
Store up to 10 copy job programs that you use frequently
A further 5 copy job programs are available for each valid access number.
These must be enabled in User Mode.
1
Set the copier to the desired modes.
Touch the User Mode box on the Control Panel.
2
The display will change.
3
Touch the [Job Memory Input] box.
The display will change.
Touch the [Store] box, followed by a
4
Program Memory Key (from [1] to
[10]) to store your settings at the
selected program location.
or
Touch the [Account Job] box to
display supplementary program
locations for your access number.
5
Touch the [Check] box, followed by
the box for the program location at
which you have stored your
program.
The display will change.
Rev. /
free program location
occupied program location
6
6-1
Advertisement
Table of Contents
