Winding The Bobbin Using The Auxiliary Spool Pin; Inserting The Bobbin - Husqvarna Viking Designer Topaz 25 User Manual

WINDING THE BOBBIN USING
THE AUXILIARY SPOOL PIN
1. Place an empty bobbin on the bobbin spindle on the top
bobbins.
®
2. Fold out the auxiliary spool pin. Place a spool cap and a
felt pad under the spool.
the inside to the outside.
excess thread. When the bobbin is full it will stop rotating.
Release the foot control. Push the bobbin spindle back to
thread cutter.

INSERTING THE BOBBIN

Press the ON/OFF switch to "O".
2. Place the bobbin in the bobbin case. It drops in only one
way with the logo facing up. The thread unreels from the
left of the bobbin. The bobbin will then rotate counter-
clockwise when you pull the thread.
A
B
1.
F
E
G
3.
D
C
2.
I
H
4.
S U
ET P
19