Table of Contents
Advertisement
PROGRAMMING
The programming function on your machine makes it possible
to create stitches with your own personal settings and to
combine stitches and letters into stitch programs. You can add
own stitches and programs in
time you like.
for buttonholes, darning stitches, button sewing and bartacks.
CREATE A STITCH PROGRAM
programming.
another stitch menu by using the arrow buttons.
3. Press the number of the stitch you wish to use. The stitch
4. Press the number of the next stitch and it will appear to
the right of the last entered stitch.
Note: Two numbers are displayed above the stitch program on the left
selected stitch in the program. The second number, put in brackets, is
the total number of stitches in the program. The number above the
stitch program on the right side of the GraphicDisplay is the number
of the selected stitch.
ADD LETTERS
add the letter to the program.
7. To switch to a lower case alphabet or numbers press the
ABOUT PROGRAMMING LETTERS
7 mm stitch width. If there are letters going below the
uppercase letters will be reduced.
same program to ensure the letters are sewn out in the same
height.
For instance, a name and an address should be in the same
Programming Mode
4.
6.
"Husqvarna" and "VIKING" have been programmed separately.
"Husqvarna" and "VIKING" are in the same program.
S
M
39
EWING
ODE
Advertisement
Table of Contents
