HOOP OPTIONS
position.
HOOP SIZE
A
Use the up and down arrow buttons to select a different hoop and
Note: If you start embroidering and the hoop you have selected is not the same as
the hoop attached to the embroidery unit, a pop-up message will appear to inform
you of this. Attach the correct hoop or select another hoop in the list.
CURRENT STITCH
the current stitch and start embroidering where the embroidery was
button once to return to current stitch and start to embroider.
PARK POSITION
Park Position. The embroidery arm will be placed in a position that will
allow easy storage.
Note: It is very important that the hoop is removed, otherwise the hoop, needle or
presser foot may be damaged.
BOBBIN POSITION
and replace the bobbin.
TRIM POSITION
CENTER POSITION
Use the Center Position if you want to check where the Center
Position of the hoop will be placed on the fabric.
72