Table of Contents
Advertisement
WINDING THE BOBBIN WITH
THE MACHINE THREADED
highest position.
Note! Do not use a plastic presser foot when bobbin winding.
1. Place an empty bobbin on the bobbin spindle on the top
of the machine. The
bobbins.
®
2. Pull the thread from the needle under the presser foot and
the inside to the outside.
Note: When using an earlier version of HUSQVARNA VIKING
bobbins that do not have a hole, wind several turns of thread on the
bobbin to get started.
excess thread. When the bobbin is full it will stop rotating.
Release the foot control. Push the bobbin spindle back to
thread cutter.
WINDING THE BOBBIN USING
THE VERTICAL SPOOL PIN
1. Place an empty bobbin on the bobbin spindle on the top
bobbins.
®
2. Place the large spool cap and a felt pad under the spool on
the inside to the outside.
excess thread. When the bobbin is full it will stop rotating.
Release the foot control. Push the bobbin spindle back to
thread cutter.
Note: When using an earlier version of HUSQVARNA VIKING
bobbins that do not have a hole, wind several turns of thread clockwise
on the bobbin to get started.
18
®
A
B
®
C
D
C
D
Advertisement
Table of Contents
