Set Menu - Husqvarna Viking Designer Topaz 25 User Manual

SET MENU

You can change the pre-set machine settings and make manual
THREAD TENSION
Your machine will automatically set the best thread tension for the
selected stitch and fabric. Use the left/right arrow buttons if you need
when the machine is turned off.
PRESSER FOOT PRESSURE
and 8.5 in steps of 0.5. Your manual setting will be cancelled when you
select another stitch or turn off the machine.
Note: When you save a stitch or program in My Stitches the setting of the presser
foot pressure is also saved.
PIVOT HEIGHT
FREE MOTION:
reduce the space between the presser foot and the fabric and eliminate
the skipped stitches.
Note: Be careful not to reduce the pivot height too much. The fabric must still move
freely under the presser foot.
EMBROIDERY MODE:
presser foot. If there is not enough space between the presser foot
and the embroidery, the top thread will form loops on the underside
SENSOR FOOT AUTO
for lifting the presser foot for example when stopping with the needle
turned off.
30
(ONLY IN SEWING MODE)
(ONLY IN SEWING MODE)
SET Menu, Sewing Mode
SET Menu, Sewing Mode
B
A