Table of Contents
Advertisement
NEEDLE THREADER
The needle must be in the up position to use the built-in
needle threader. We also recommend lowering the presser
foot.
1. Use the handle to pull the needle threader all the way
2. Push back to bring the needle threader forward until the
4. Let the needle threader gently swing back. The hook pulls
the thread through the needle eye and forms a loop behind
the needle.
5. Pull the thread loop out behind the needle. Place the
thread under the presser foot.
Note: The needle threader is designed to be used for size 70-120 needles.
You cannot use the needle threader for size 60 needles or smaller, the wing
needle, twin needle, triple needle or when the Sensor One-Step Buttonhole
Foot is on. There are also some other optional accessories that require
manual threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back. The white presser foot
ankle makes it easy to see the eye of the needle. The bobbin
CUTTING THE THREAD
presser foot and pulling the threads from the front to the back
into the thread cutter on the left side of the machine.
16
A
1.
2.
3.
4.
C
5.
B
Advertisement
Table of Contents
