Table of Contents
Advertisement
BUTTONHOLE BALANCE
1:25, the columns in the buttonhole stitch will be sewn in different directions.
Use the left/right buttons to balance the density between -7 and 7. The changes
only affect the selected stitch. If another stitch is selected or the same stitch is
AUTOMATIC JUMP STITCH TRIM
turned off.
Note: The machine will also cut the thread after you have changed to a new color. Hold the
thread end when you start embroidering again, so that you can easily remove the thread end
when cut.
Designs marked with this symbol are programmed for Automatic Jump
Stitch Trim. Jump stitch trim commands can be added to any design using the
downloadable software. See page 24.
Note: If the front and back of your embroidery will be visible, turn off the Automatic Jump
Stitch Trim and cut the threads manually.
MY HOOPS
(ONLY IN EMBROIDERY MODE)
Use the right arrow button to open a menu where you can set the hoops you
AUDIBLE ALARM
CONTRAST
LANGUAGE
Use the left/right arrow buttons to change the language of all text in your
SOFTWARE VERSION
32
(ONLY IN SEWING MODE)
(ONLY IN EMBROIDERY MODE)
SET Menu, Sewing Mode
SET Menu, Embroidery Mode
My Hoops Selections Menu
SET Menu, Sewing Mode
Advertisement
Table of Contents
