Table of Contents
Advertisement
EMBROIDERY FUNCTIONS
ONE-COLOR EMBROIDERY (MONOCHROME)
Press STOP (1) to cancel the color stops if you want to sew a
design in one color only.
Note: If the Automatic Jump Stitch Trim function is activated in the
SET Menu it will still be active between the color blocks.
BASTING
Press the FIX button (2) and the machine will add a basting stitch around the
design area. Basting enables you to secure your fabric to a stabilizer placed
beneath. It is especially useful when the fabric to be embroidered cannot be
hooped. Basting provides support for stretchy fabric and also shows where
the design will be placed on the fabric.
PARK POSITION/TRIM POSITION
Remove the hoop and press the Needle Stop Up/Down button (3) to put the
embroidery unit in Park Position for easy storage.
Press the Needle Stop Up/Down button when the hoop is attached and the
hoop moves towards you, making it easy to cut jump stitches or trim fabric.
Cut the jump threads and press the button again. The hoop moves back to
the current stitch. Press Start/Stop to resume the embroidery.
Note: The Hoop Options menu will open to show the actual position.
CORNER CHECK
Corner check can be used to trace the four corners of the design. Press
the Corner check button (4). Each time you press the button the hoop will
move to one of the corners in the following order: upper left, upper right,
center position of the design and on the sixth press back to the current
stitch position. A crosshair will indicate the current needle position on the
GraphicDisplay.
The Corner check function also shows where the design will be embroidered
on the fabric. This makes it easier to position designs when embroidering
several designs in succession.
STEP STITCH-BY-STITCH
Use the Step Stitch-by-Stitch – and + buttons (5) to step through the design
stitch by stitch. If the top or bobbin thread runs out or is broken, step
backwards a few stitches before starting to embroider again. Current stitch
number is shown on the GraphicDisplay in the Stitch-out view.
STEP COLOR-BY-COLOR
the previous or next color. The current color block number is shown, next
to the total number of color blocks in the design, shown in brackets, in the
Stitch-out view on the GraphicDisplay. Press the Embroidery Info button to
view the complete color block list.
1
2
5
6
Basting
Corner Check
E
3
5
6
4
M
73
MBROIDERY
ODE
Advertisement
Table of Contents
