Harvia Sentiotec A2 Instructions For Installation And Use Manual page 55

Instructions for installation and use
Connection cables
Power supply cable:
Heater supply cable:
Sensor wires:
Light wire:
Temperature resistance
Heater, light and sensor wires
Power supply cable
Preset time function
Minimum preset time
Maximum preset time
Auxiliary power units
S2-18: Increase of the switched power to 18 kW full power
S2-30: Increase of the switched power to 30 kW full power
p. 27/28
min. 5 x 2.5 mm²
min. 1.5 mm²
min. 0.5 mm²
min. 1.5 mm²
min. 150 °C
min. 90 °C
1 minutes
23 hours 59 minutes
EN